Best Y Level For Netherite In Minecraft 1.20 And Farming Tips (2024)

Netherite, a rare and powerful material in Minecraft, is found in the Nether as Ancient Debris blocks. The best Y level to mine for Ancient Debris, which is then converted into Netherite, is Y level 15. This level is considered optimal due to the higher frequency of Ancient Debris blocks found here​​​​​​​​​​.

Netherite Spawn Location – Where To Find This Rare Material

Netherite spawns exclusively in the Nether realm of Minecraft. It doesn’t naturally generate in the Overworld. The most common Y levels for Netherite, specifically the Ancient Debris blocks, range from 8 to 22, with the highest concentration at Y level 15​​​​​​.

How To Get Into Nether Realm

To access the Nether for Netherite mining, follow these steps:

  1. Create a Nether Portal: Use a minimum of 9 Obsidian Blocks to build a portal frame, the minimum size being 4 x 5 blocks.
  2. Activation: Use a source of fire (Flint & Steel, Fire Charge, etc.) to ignite the portal, which should start glowing purple, indicating it’s active.
  3. Transport: Upon entering the portal, it takes 4 seconds to transport your avatar to the Nether, and stepping out during this time cancels the transport​​.

Finding Ancient Debris

Ancient Debris, the key to finding Netherite, is reported to spawn more frequently around chunk borders. Players can use this to their advantage. Press F3 + G to enable chunk borders, which appear as yellow lines at the edge of each chunk. Mining along these borders can significantly increase the chances of finding Ancient Debris.

Navigate to Settings, then Game, and enable “Show Coordinates.” You are at a chunk border when your X or Z coordinates are divisible by 16. By focusing mining activities along these chunk borders, players can more efficiently locate Ancient Debris, the precursor to Netherite.

Farming Netherite In Minecraft 1.20

Mining at Y level 15 in the Nether realm is the most straightforward method. Ancient Debris blocks, from which Netherite is derived, are typically found between Y level 11 and 19. Preparation is key when mining at this level, as players will often find themselves below lava lakes. It’s crucial to have fire resistance potions and fire protection armor. An alternative method includes looting Bastion Remnants, where ancient debris, netherite scraps, and even Netherite ingots, with varying chances of finding each in different types of chests​.

How to Mine for Netherite in Minecraft 1.20

Mining for Netherite requires a strategic approach:

  • Mining Safely: As mining at Y level 15 is often dangerous due to lava lakes, players should be well-prepared with safety equipment like fire resistance potions and fire-protected armor​​.
  • Using Explosives: An effective technique involves using beds or TNT to explode areas in the Nether, revealing the presence of Ancient Debris blocks. These blocks are blast resistant and remain intact after explosions. This method allows for a more efficient identification of Ancient Debris locations​​.

How TNT Mining Works

TNT mining is a powerful technique for Netherite extraction, leveraging the unique blast resistance of Ancient Debris. Here’s an optimized approach:

  1. Creating the Tunnel: Construct a strip mining tunnel in the Nether, ideally around Y=14, to efficiently cover the most productive depths (Y=8 to Y=22).
  2. Placing TNT: Strategically place TNT every 4 blocks within the mine. This spacing optimizes the blast coverage while ensuring the safety of the structure.
  3. Safety Precautions: Ensure there is an escape route and maintain a safe distance when igniting the TNT. The explosive force of TNT can be dangerous.
  4. Ignition and Explosion: Use flint and steel to ignite the nearest TNT, then quickly retreat. The TNT will explode in a chain reaction, creating a large cavern.
  5. Post-Explosion: Wait for the explosions to subside before returning to the tunnel. The exposed cavern will likely reveal any Ancient Debris in the vicinity, which will remain intact due to its blast-resistant properties.

How Netherite Mining With Beds Works

Using beds for mining in the Nether is an innovative method that leverages the explosive properties of beds in the Nether realm:

  1. Preparation: Remember, beds can’t be used for sleeping in the Nether, but they explode when a player tries to use them.
  2. Execution: Mine out four or five blocks at Y level 8-22, place a bed at the end, and try to use it. This will cause an explosion, revealing any Ancient Debris in the vicinity.
  3. Safety Measures: Stay as far back as possible to avoid blast damage and be wary of lava, as the explosion can create openings for it to pour in​​.

For a more traditional approach, create a basic mine shaft. This involves a 3×3 or 4×4 mine shaft with a ladder on one side for easy access and extraction of resources. This method is straightforward and effective for methodical mining.

Staircase Mining

This technique involves constructing a descending staircase into the quarry, allowing for steady progression as you mine. You can choose different designs like spirals or diagonals for your staircase, offering both efficiency and aesthetic appeal.

Vertical Strip Mining

In vertical strip mining, dig vertical mine shafts of a chosen width, ideally with spiral staircases for easy movement. This technique is especially suitable for large-scale resource extraction​​.

Dig vertical mine shafts to your desired depth, focusing on Netherite-rich layers. You can choose various widths like 2×1, 1×1, 2×2, or 4×4, depending on your preference and objectives.

Incorporate spiral staircases within these shafts to facilitate easy and efficient movement up and down. Always carry water and additional blocks to deal with unexpected lava encounters. For those less inclined towards structured mining, wandering the Nether and spotting surface Ancient Debris with a Spyglass is another viable method. While less efficient than strip mining, it offers a more relaxed and exploratory experience.

What Happens After Mining Netherite

Once Ancient Debris is mined, it can be smelted in a furnace to obtain Netherite scraps. Combining four Netherite scraps with four gold ingots on a crafting table yields one Netherite ingot​​.

In Minecraft 1.20, Netherite serves several key purposes, making it a highly sought-after material:

  1. Crafting Netherite Armor and Tools: Netherite can be used to upgrade diamond armor and tools, enhancing their durability, efficiency, and overall performance.
  2. Increased Durability: Netherite items have significantly higher durability than their diamond counterparts, making them last longer during use.
  3. Fire Resistance: Items made from Netherite do not burn in fire or lava, providing an added layer of safety for players.
  4. Enhanced Damage and Armor Stats: Netherite tools deal more damage, and Netherite armor offers better protection compared to diamond versions.
  5. Knockback Resistance: Netherite armor provides knockback resistance, offering a strategic advantage during combat.
  6. Aesthetic Appeal: Netherite items have a unique and visually appealing look, differentiating them from other materials.

These uses make Netherite a valuable resource in Minecraft, offering players advanced equipment options for both utility and combat.

Best Y Level For Netherite In Minecraft 1.20 And Farming Tips (2024)

References

Top Articles
Latest Posts
Article information

Author: Nathanael Baumbach

Last Updated:

Views: 5819

Rating: 4.4 / 5 (55 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Nathanael Baumbach

Birthday: 1998-12-02

Address: Apt. 829 751 Glover View, West Orlando, IN 22436

Phone: +901025288581

Job: Internal IT Coordinator

Hobby: Gunsmithing, Motor sports, Flying, Skiing, Hooping, Lego building, Ice skating

Introduction: My name is Nathanael Baumbach, I am a fantastic, nice, victorious, brave, healthy, cute, glorious person who loves writing and wants to share my knowledge and understanding with you.